Thermolyne Premium Large Muffle Furnaces - Programmable with 4 programs, 16 segents each (D1) - F6038CM

Thermolyne Premium Large Muffle Furnace features a robust design and a choice of four temperature controller models, making it perfect for industrial applications. This furnace provides a spacious 14L (0.5 cu.ft.) capacity and reaches a maximum of 1200°C, making it ideal for ashing organic and inorganic samples and conducting gravimetric analysis. -Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity -Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit -Rear of the chamber incorporates a 0.95CM (0.38 inch) dia. port for monitoring chamber temperatures with independent measuring devices -Optional stainless-steel shelf doubles load capacity (maximum temperature of 900°C) -Door safety switch stops power to heating elements when door opens -Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition -Furnaces with B1, C1, and D1 control also use a mechanical over temperature protection relay -Temperature Range: 100° C to 1200° C -Capacity: 14L (0.5 cubic feet) -Interior D x W x H: 25 x 33 x 18cm (10 x 12.8 x 6.8 inch) -Exterior L x W x H 51 x 48.5 x 53.3cm (20.1 x 19.1 x 21 inch) Choice of Temperature Controllers -Digital single set point control (A1): Single display shows actual temperature or setpoint -Digital single set point control with single ramp to set point and a dwell (B1): Single display shows actual temperature or setpoint - Digital programmable control with one stored program of eight segments (C1) - Digital programmable control with four stored programs, 16 segments per program (D1): Controller includes RS-232 communications