Incubator with Forced Convection - BF 115 ul - 9010-0238

Incubator with forced convection - The BINDER incubator BF series is the highest-class for all gentle incubation tasks, particularly under a full load and large batch throughputs. It is extremely homogeneous and has quick recovery times. Performance Characteristics: Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results; Temperature range from 5 °C (9 ºF) above room temperature to 100 °C (212 °F); Digital temperature setting with an accuracy of a tenth of a degree; MS controller with several timer functions; Controller time functions: 0 to 99 h 59 min delayed ON, 0 to 99 h 59 min delayed OFF, 0 to 99 h 59 min temperature-dependent, delayed OFF; Adjustable fan speed; Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50mm (1.97 inch); Inner glass door; Independent temperature safety device class 3.1 (DIN 12880) with optical alarm; RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter; Adjustable intervals for printer; Units up to 115 l (4.1 cu.ft.) are stackable; 2 chrome-plated racks included; BINDER technical specification conformance certificate. 115V, 50/60Hz, 400W